Fractional Panel Nuts

Fractional Panel Nuts - Size Selection Chart

> ISO Mission Statement

All our fractional panel nuts are quality inspected to ISO 9001: 2000 standards. We welcome the opportunity to discuss your custom requirements - click here to contact us.
Additonal specifications such as sizing, material and finish is available below.



Click on the Item Number Below to Request a Quotation

Can't find what you're looking for? Contact us with your custom requirements 1-888-286-9148.

Thread Size
Across Flats Thickness
Material
Finishes
Item #
1/4-32 5/16 x 5/64 Inch Brass Nickel 25PNHPB/31x07
1/4-40 5/16 x 5/64 Inch Brass Nickel 25RNHPB/31x07
9/32-28 7/16 x 5/32 Inch Steel Zinc 28LNHP/43x15
5/16-24 1/2 x 1/8 Inch Brass Nickel 31FNHPB/50x12
3/8-1 8 NPS 7/8 x 1/8 Inch Steel Zinc Plain 37DNPSHP/87x12
3/8-24 1/2 x 3/32 Inch Steel Nickel 37FNHP/50x09
3/8-24 9/16 x 3/32 Inch Steel Nickel 37FNHP/56x09
3/8-27 1/2 x 3/32 Inch Steel Nickel 37JNHP/50x09
3/8-32 1/2 x 3/32 Inch Steel Nickel 37PNHP/50x09
3/8-32 9/16 x 3/32 Inch Steel Plain 37PNHP/56x09
7/16-20 5/8 x 5/32 Inch Steel Plain 43FNHP/62x15
7/16-28 9/16 x 3/32 Inch Steel Zinc Yellow 43LNHP/56x09
15/32-32 9/16 x 3/32 Inch Steel Nickel 46PNHP/56x09
1/2-20 3/4 x 11/64 Inch Steel Zinc 50FNHP/75x17
1/2-20 5/8 x 1/8 Inch Steel Zinc 50FNHP/62x12
1/2-24 5/8 x 1/8 Inch Steel Zinc 50JNHP/62x12
1/2-32 5/8 x 1/8 Inch Steel Zinc 50PNHP/62x12
9/16-18 3/4 x 5/32 Inch Steel Zinc 56FNHP/75x15
5/8-18 3/4 x 5/32 Inch Zinc Die Cast Zinc, Zinc Yellow,  Plain 62FNHPD/75x15
5/8-24 3/4 x 5/32 Inch Zinc Die Cast Zinc, Plain 62JNHPD/75x15
5/8-32  3/4 x 5/32 Inch Zinc Die Cast Zinc, Plain  62PNHP/75x15
5/8-32 15/16 x 1/8 Inch Steel Zinc 62PNHP/93x12
5/8-32 7/8 x 1/8 Inch Steel Zinc 62PNHP/87x12

 

  Results 1 - 25 of 60

 

1   2   3  > 
Page 1 of 3  
 

Questions?

How May
We Help?

1-888-286-9148



Nutco carries all standard sizes of panel nuts in stock, including those tapped oversize. We are also capable of supplying specials to meet your needs. Not only do we keep a large volume in stock, but our specialty nuts are always in production to ensure that you have what you need, when you need it. Nutco has a complete inspection department for the utmost in quality control.

Stamped steel:

Blanks made on progressive dies in order to provide exacting thread requirements. All inspected for quality including concentricity.

Zinc die cast panel nuts:

Blanked as multiple cavity tooling. Tapped as secondaries. We are continuously tooling new sizes. The following is a partial listing. If your specific size is not listed, please contact us with your request. Minimum order small sizes is 2500 pieces (up to 3/4). Platings and materials defined on request.