Fractional Panel Nuts

Fractional Panel Nuts - Size Selection Chart

> ISO Mission Statement

All our fractional panel nuts are quality inspected to ISO 9001: 2000 standards. We welcome the opportunity to discuss your custom requirements - click here to contact us.
Additonal specifications such as sizing, material and finish is available below.



Click on the Item Number Below to Request a Quotation

Can't find what you're looking for? Contact us with your custom requirements 1-888-286-9148.

Thread Size
Across Flats Thickness
Material
Finishes
Item #
11/16-20 7/8 x 1/8 Inch Steel Zinc 68INHP/87X12
11/16-24 1.0 x 1/4 Inch Zinc Die Cast Plain 68JNHPD/100x25
11/16-27 15/16 x 1/8 Inch Steel Zinc 68KNHP/93X12
11/16-28 15/16 x 1/8 Inch Steel Zinc 68LNHP/93x12
3/4-14 NPSM 1 1/2 x 3/8 Inch Zinc Die Cast Plain 75SMNHPD/150x37
3/4-16 7/8 x 5/32 Inch Zinc Die Cast Zinc, Plain 75FNHPD/87X15
3/4-16 7/8 x 5/32 Inch Stainless Steel N/A 75FNHPS/87x15
3/4-16 1.0 x 1/4 Inch Zinc Die Cast Zinc, Plain 75FNHPD/100x25
3/8-27 1/2 x 3/32 Inch Steel Nickel 37JNHP/50x09
3/4-20 1.0 x 1/4 Inch Zinc Die Cast Zinc 75INHPD/100x25
3/4-24 7/8 x 1/8 Inch Steel Zinc 75JNHP/87X12
3/4-24 7/8 x 5/32 Inch Zinc Die Cast, Steel Zinc, Plain 75JNHP/87X15
3/4-25 7/8 x 5/32 Inch Zinc Die Cast Plain 75SNHPD/87x15
3/4-27 7/8 x 1/8 Inch Steel Plain 75KNHP/87x12
3/4-27 7/8 x 5/32 Inch Zinc Die Cast, Steel Zinc 75KNHP/87X15
3/4-28 7/8 x 5/32 Inch Zinc Die Cast Zinc, Plain 75LNHP/87X15
3/4-32 7/8 x 1/8 Inch Steel Zinc, Plain 75PNHP/87X12
3/4-32 7/8 x 5/32 Inch Steel Zinc 75PNHP/87X15
13/16-27 1 x 5/32 Inch Zinc Die Cast Zinc 81KNHPD/100X15
13/16-28 1 x 1/4 Inch Zinc Die Cast Zinc 81 LNHPD/100x25
7/8-14 1 x 1/4 Inch Zinc Die Cast Zinc 87FNHPD/100x25
7/8-14 1 1/8 x 1/4 Inch Zinc Die Cast Plain 87FNHPD/112x25
7/8-16 1 1/8 x 1/4 Inch Zinc Die Cast Plain 87GNHPD/112
7/8-20 1 1/8 x 1/4 Inch Zinc Die Cast Zinc, Nickel 87INHPD/112x25
7/8-24 1 x 5/32 Inch Zinc Die Cast Zinc 87JNHPD/100x15

 

  Results 26 - 50 of 60

 

<   1   2   3   > 
Page 2 of 3  

 

Questions?

How May
We Help?

1-888-286-9148



Nutco carries all standard sizes of panel nuts in stock, including those tapped oversize. We are also capable of supplying specials to meet your needs. Not only do we keep a large volume in stock, but our specialty nuts are always in production to ensure that you have what you need, when you need it. Nutco has a complete inspection department for the utmost in quality control.

Stamped steel:

Blanks made on progressive dies in order to provide exacting thread requirements. All inspected for quality including concentricity.

Zinc die cast panel nuts:

Blanked as multiple cavity tooling. Tapped as secondaries. We are continuously tooling new sizes. The following is a partial listing. If your specific size is not listed, please contact us with your request. Minimum order small sizes is 2500 pieces (up to 3/4). Platings and materials defined on request.